Processing Characteristics Description

Cutting Processing:

• Mechanical Cutting: Recommended tungsten steel刀具， feed speed 8-12 m/min.

• Laser Cutting: CO₂ laser, power 60-80W, speed 5-8 mm/s.

• Waterjet Cutting: Pressure 380 MPa, cutting precision ±0.2 mm.

Edge Treatment:

1. Polishing: Flame polishing or mechanical polishing possible.

2. Chamfering: Recommended R1-R3 round corner.

3. Drilling: Carbide drill bit, speed 800-1200 rpm.

Surface Lamination:

• Lamination with transparent sheet: Enhances mechanical strength.

• Lamination with aluminum plate: Forms aluminum composite panel.

• Lamination with wood board: Decorative composite board.

Quality Inspection Standards

Certifications and Compliance

Packaging and Storage/Transportation Specifications

Packaging Method:

• Single Sheet Packaging: PE film + bubble bag + corner protectors.

• Bulk Packaging: Wooden crate / steel frame crate, ≤500kg per pallet.

• Moisture Protection: Built-in desiccant, wrapped with moisture-proof film.

Storage Conditions:

• Storage Temperature: 10-35°C.

• Relative Humidity: ≤70%.

• Stacking Height: Flat stacking ≤1.5m, vertical storage requires rack.

• Avoid Contact With: Organic solvents, sharp objects.

Transportation Requirements:

• Rain and moisture-proof packaging.

• Avoid heavy object compression.

• Insulated transportation required when temperature is below -10°C.

Technical Selection Guidance

1. Thickness Selection Guide:

   • Partitions & Decoration: 2-3mm (Economical type)

   • Bathroom Partitions: 5-8mm (Safe and durable)

   • Industrial Applications: 3-5mm (High strength requirements)

   • Advertising Use: 2-3mm (Balance of light transmission and privacy)

2. Texture Selection Principles:

   • High Privacy: Artistic coarse sand / 3D coarse sand

   • Moderate Privacy: Standard coarse sand

   • Decorative Effect: Striated coarse sand / Custom patterns

3. Environmental Adaptability Selection:

   • Outdoor Use: Must select UV-enhanced type.

   • Humid Environments: Mold-resistant treatment type.

   • High-Temperature Environments: High-temperature resistant formula (Vicat ≥85°C).

Installation and Construction Guide

Frame Installation:

1. Profile Selection: Aluminum alloy / Stainless steel frame.

2. Sealing Treatment: Silicone sealant.

3. Expansion Gap: Reserve 3-5mm expansion joint.

Adhesive Installation:

• Recommended Adhesive: Silicone structural adhesive.

• Surface Preparation: Clean, dry, degrease.

• Curing Conditions: Initial cure in 24 hours at 25°C.

Maintenance:

• Cleaning Frequency: 1-2 times per month.

• Cleaner: Neutral cleaner.

• Tools: Soft cloth, sponge.

• Prohibited: Steel wool, strong acids/alkalis.

Technical Parameters Table