Technical Parameter Table

Performance Indicator	Parameter Range	Parameter Range
Coefficient of Friction	0.04-0.08	ASTM D1894
Wear Amount	Wear Amount	ASTM D3702
Dielectric Strength	40-60 kV/mm	IEC 60243
IEC 60243	< 0.01%	ISO 62

Product Advantages

1.  Extreme Wear Resistance:

       Wear resistance is 10 times that of standard PTFE

       PV value can reach 1.0 MPa·m/s

       Service life extended by 5-8 times

2.  Exceptional Chemical Stability:

       Resistant to strong acids and alkalis (except molten alkali metals)

       Insoluble in any organic solvent

       Compliant with FDA food-grade standards

3.  Unique Surface Properties:

       Surface Tension: Only 18.5 dyne/cm

       Dynamic Contact Angle: >110°

       Permanently non-stick

Application Fields

   Chemical Equipment: Reactor linings, pipeline seals

   Mechanical Engineering: Wear-resistant guides, bearing shims

   Food & Pharmaceutical: Processing equipment work surfaces

   Electronics Industry: High-purity media containers

Product Specifications

Thickness (mm)	Size (mm)	Tolerance	Color
1-10	1000 × 1000	±0.1	White
10-30	1200 × 1200	±0.2	White
30-50	1500 × 1500	±0.3	White

Machining Recommendations

1.  Cutting Tool: Diamond-tipped tools

2.  Cutting Speed: 80-120 m/min

3.  Feed Rate: 0.05-0.15 mm/rev

4.  Cooling Method: Cold air cooling

Precautions

1.  Avoid direct contact with sharp tools.

2.  Consider the coefficient of thermal expansion during installation.

3.  Long-term use temperature should not exceed 260°C.

4.  Prohibited for use in hydrofluoric acid environments.

Note:This product can be customized to meet specific needs:

   Conductive Type (Volume Resistivity < 10³ Ω·cm)

   Reinforced Type (Glass/Carbon Fiber Filled)

   Medical Grade (ISO 10993 Certified)

   Extra-Large Size Customization (Up to 3000 × 3000 mm)

Basic Specification Parameters

Item	Parameter Specification	Test Standard	Remarks
Material	Ultra-High Molecular Weight PTFE	ASTM D4894	Molecular Weight ≥ 6 Million
Color	White / Custom	-	Standard is Pure White
Density	2.16-2.20 g/cm³	ISO 1183	-
Thickness	1-50 mm	ISO 3302	Tolerance ±0.1 mm
Size	1000×1000 to 3000×3000 mm	-	Customizable

Physical Performance Parameters

Performance Indicato	Standard Value	Reinforced Type Value	Test Method
Tensile Strength (MPa)	30-35	35-45	ASTM D638
Elongation at Break (%)	300-400	250-350	ASTM D638
Compressive Strength (MPa)	25-30	30-35	ASTM D695
Flexural Strength (MPa)	20-25	25-30	ASTM D790